How To Change A Trailer Tyre

Adelaide Trailer Hire Safe Towing Guide.
ALL INFORMATION GIVEN IN THIS DOCUMENT IS TO BE USED AS A GUIDE ONLY. IT IS THE HIRER’S RESPONSIBILITY TO ENSURE THEY HAVE THE REQUIRED SKILLS AND KNOWLEDGE TO SAFELY TOW AND OPERATE THE TRAILERS OR EQUIPMENT.

*If in doubt, DO NOT attempt to change a tyre. Call the RAA or a qualified professional. If you get a flat tyre on your trailer and need to change it, follow the steps below: Find a safe spot to pull over. Turn on your hazard lights. Use the wheel brace to loosen the wheel nuts. (19mm or 21mm). Use the jack to lift the vehicle off the ground. – See How to jack up a trailer. Remove the wheel nuts and pull the tire off the trailer. Place the spare on the trailer. Replace the wheel nuts. Tighten the wheel nuts in a star shape pattern. (To make sure the wheel is on straight). Spin the wheel to check it is balanced. Lower the trailer off of the jack. Re tension the wheel nuts tight to make sure they are on tight enough. ? *If in doubt, call the RAA.